Submeter Installation: How Much Does it Cost to Install a Sub Meter (2023)

How much does it cost to install a sub meter? The average installation cost for Sub Meter is $300 – $600. Estimated submeter’s equipment or hardware costs around $120 – $180.

The cost of installing a sub meter varies depending on the size and complexity of your project.

Here are the costs associated with installing a residential sub-meter

  • Small sub-meter charge: $260.
  • Large sub-meter charge: $525.
How Much Does it Cost to Install a Sub Meter
How Much Does it Cost to Install a Sub Meter

For water sub meter installation cost, if you need to install a new water line, it could be as much as $5,000.

However, if you’re just adding a sub-meter to an existing service line without needing any additional work done then the installation will only take about 3 hours and cost around $500.

The best way to get an accurate estimate is by scheduling an appointment with one of electrical or plumbling experts so they can walk through your specific needs and provide you with a quote for the whole job – including parts and labor!

How much does it cost to install a sub meter

The costs of installing a sub meter will depend on the location and size of the house, as well as any other appliances which might be needed in that area.

Generally speaking however it shouldn’t cost you more than $100.00 to have one installed by a qualified electrician.

You can find these professionals in your local area online or by simply asking around.

Submeter Installation: What is a sub meter?

A sub meter is a device which reports how much power your appliances are using.

This data is then sent to the main electric board, allowing you to regulate your own energy consumption.

If you have solar panels installed on your roof, a sub meter will allow you to monitor how much power they’re supplying.

In some places like Alberta there are government grants available for having one installed onto your property.

You can find a qualified electrician to do this in your area by asking around or by going online.

Why should you get sub meter installed for your home

Why should I install a sub meter on my property? A sub meter is a device installed in your home to measure the energy used by each individual appliance.

It is one of the many ways you can reduce your energy bills.

Energy companies charge different rates for electricity usage depending on the time of day and seasons, so it’s important to monitor how much you’re using when as this may change the amount you pay.

What are the benefits of installing a sub meter

One of the questions I get asked all the time is what are the benefits of installing a new metered system in my home?

Some benefits of having a sub meter installed are:

1. Monitors your energy usage so you can see which appliances are using more than others and take actions to reduce it (turning off lights, not leaving the television on standby, etc.)

2. It displays your energy usage on the meter’s digital screen.

3. It reduces the time required to receive an energy bill as you only have to pay for what you use.

4. You can better understand how much your appliances are costing you and whether or not they’re beneficial overall by checking the ‘cost per hour’ displayed on the meter.

5. It allows you to monitor and reduce how much energy you are using, therefore reducing your bills.

There are two types of sub meters available: the advanced model for houses with smart metering (using wireless technology) and the traditional model for houses without smart metering.

Now you know about sub meters, why not look into getting one installed in your home?

You can contact an energy company or supplier to see what is available and affordable for you.

A good place to begin your search would be with three of the biggest energy providers: E.ON (www.eonenergy.com), British Gas (www.britishgas.co.uk) and SSE (www.sse.com).

The process of installing a sub meter in your home

What can happen  if you don’t have a sub meter?

If you have an energy provider which requires you to pay for your usage in advance, they will base their guess on the average size of homes in the area.

Most houses aren’t empty and therefore require constant heating or lighting. If your house is bigger than the average in that area it runs the risk of using all its energy faster than anticipated. This could result in you having to pay extra or even lead to disconnection if your usage is too high.

Who can help me with the installation process of a new metered system for my home?

1. The purpose of a sub meter is to measure and calculate the amount of electricity or gas that you use for your home

2. You will need an electrician to install it in your home, but this can be done yourself with some help from family and friends

3. It’s important to know how much power you’re using so that you can lower your bills by conserving energy

4. A submeter measures the total usage of electricity or gas over a certain time period, such as one day, week, month, year etc., rather than measuring individual appliances like microwaves, ovens and dryers

5. Submetering has been proven to save homeowners money on their monthly utility bill

6. When installing a submeter make sure it has access points for future expansion if necessary

See Also: Backing Out of Lease before Signing

Are there any disadvantages of installing a sub meter on your property

1. You need to have a good relationship with your utility company

2. The installation of the sub meter can be expensive, depending on where you live

3. If there is any kind of power outage in your area, it might take longer for power to return because the electricity has to flow from two different sources

4. Your home’s value may decrease if you install a submeter instead of having all utilities run through one account holder

How to install an electric sub meter

Installing an electric sub-meter is a great way to reduce your electric bill. I will show you how to install one.

The first thing you need to do is find out what kind of power meter that your utility company uses, either single phase or three phase.

Single phase meters are the most common and require only two wires for installation whereas three phase requires four wires.

The next step is to identify where on your property the meter will be installed, with easy access for maintenance purposes if necessary.

Then all you have to do is call up the utility company and schedule an appointment for them install it!

The installation of an electric sub meter is not a difficult process.

If you follow the instructions and have all necessary materials, it’s easy to install your own submeter.

It comes with manual that shows you how to properly install an electric sub meter even with support from the manufacturing company team of experts!

Installing an electric sub meter is not a difficult task.

You will need to turn off power at the breaker box, disconnect all of the wires from your old sub meter, and then install the new one in place.

This process should take about 45 minutes or less for someone with basic skills like you!

The hardest part may be finding room inside your electrical panel where it can sit securely; but if that doesn’t work out, you can use some thin wire ties to attach it to other parts within the panel.

If you want help installing yours today, contact any expert electrician that offers free estimates on any project related to home safety or security.

Also See: Convert Manufactured Home To Stick Built

What does a water sub meter look like

What does a water sub meter look like

A water submeter is a device that measures the volume of water used by one individual.

It can be installed on an existing residential or commercial property to measure and bill for the amount of water used.

A meter reader comes and reads your meter, then gives you a monthly bill based on your usage that includes charges for wastewater services, sewer service, drainage service, stormwater management fee, conservation charge and other fees as applicable.

A water submeter system saves time because there are no more bills to go through every month which means less paper waste!

And with all this talk about conserving our natural resources, it’s important to know how much you’re using so you can use less without sacrificing quality of life.

Here is an image in this video that shows what a water sub meter look like.

FAQs about installing a sub meter in your home

How to install an electric sub meter

what is an electric sub meter? An electric sub meter is an electricity counter that measures the amount of energy used by a specific device.

The device signals the main meter to start measuring its consumption and then sends this information to the electric sub meter which displays it on its screen.

Electric sub meters can also be installed in several other areas of the house such as inside laundry appliances, in dishwashers and in water heaters.

An electric sub meter can be used to find out how much power a certain device is using because it displays the readings on its screen.

This reading is also known as an energy rate which refers to the amount of electricity being consumed by a specific device at the moment.

It is essential to have an electric sub meter installed if you want to compare rates with other devices and find out which one has higher consumption, or vice versa.

Check Out: Cost To Finish A House Shell

How much do electric sub meters cost?

There are many different types of electric sub meters that range in price depending on their features.

Electric sub meters are an integral part of any home or business in the modern age where electricity is a commodity.

It’s important to know how much power you use and when, so that it can be managed effectively.

There are many different types of electric meters which vary in cost and accuracy, but they all serve the same purpose: to measure your consumption accurately. 

The price will depend on what kind of meter is needed for your situation- such as single phase or three phase- and if there’s a need for additional equipment like transformers, cabling, breakers, etc.

This information will help guide you when deciding which type of meter is right for you!

Single phase

What is a single phase? Single phase power is one of the most common types of electric power that homes and businesses use.

Rather than being delivered from three wires, it is delivered through two wires. 

There are some benefits to using single-phase electricity such as lower installation costs and reduced complexity of equipment needed for distribution.

However, there are downsides such as increased voltage fluctuations resulting in high switching losses and possible service interruptions during periods of heavy demand.

These tradeoffs make single-phase energy an interesting option worth considering when deciding on your electrical needs! 

You can choose the right type of electric current for your needs.

Read: How To Fill Nail Holes In MDF Trim

Diagram

A diagram of a sub meter installation is shown below, with the following meters: gas, electric, water.

The diagram above is a representation of what a sub meter looks like

The various pipes and wires are labeled to show how each one connects to the different components.

We’ve covered and showed the cost and steps in installing a sub meter.

It includes an estimate for how much it will cost, what tools are needed, where to find the best deals on the parts you need, and what you can do if you have questions.

The following diagram shows all the materials that are necessary for installation:

  • drill with 1/4 inch bit 
  • 3-inch hole saw
  • breaker bar or air ratchet wrench
  • 6 long bolts (1/2 inch) with nuts and washers
  • 4 short bolts (1/2 inch) with nuts and washers
  • 2 water shut-off valves, one 3/8″ female threaded end cap fitting – PVC pipe thread tape

A diagram is a visual representation of an idea, we will explore the cost to install a sub meter and how it can be beneficial for your home or business.

The first step in installing a sub meter is to talk with your utility company about their requirements for installation.

It’s important that you know whether they require additional electrical work, such as new circuit breakers or wiring before they’ll approve any installations.

This can be something as simple as upgrading an existing breaker from 20 amps to 30 amps, but it could also mean adding circuits or re-wiring parts of your house or office building.

You may find that the energy company has certain guidelines for where the sub meter should be installed.

The diagram above is a representation of what a sub meter looks like. 

It has three components: the ground, the service panel, and the electric metering equipment.

The purpose of this device is to measure electricity usage in increments or kilowatt hours (kWh).

This information can be used by utility companies for billing purposes and helps homeowners monitor their energy usage. 

A typical home with electric heat will use about 11 kWh per day on average while homes without electric heat might only use 3-4 kWh per day.

A new wire that connects from your meter to your house’s electrical system should be installed once you install a submeter so that an accurate reading can be taken every month for billing purposes. 

There are many different types of meters.

Connection

“What is a connection?” This may be the most important question to ask when deciding to install a submeter.

A connection can refer to the physical link between two points, such as an electrical wire or phone line.

It can also refer to linking your electricity supply with your landlord’s meter and having them read it for you. What determines how much it will cost?

The type of service (electricity, gas, water) and where you live all play a role in determining what it costs to install a submeter.

What is a connection? This may be the most important question to ask when deciding to install a submeter. A connection can refer to the physical link between two points.

The cost to install a sub meter varies on the size of your home, who is installing it and the type of system you are using.

A solar panel installation will cost more than a gas powered one.

The average price for an installed submeter is $3000-$5000 depending on what system you purchase.

The type of electrical system in your home also affects how much it costs to install a submeter.

Installing a new electric circuit can be expensive, usually costing about $6000-$8000 for just the labor and materials alone, not including any additional work that may need to be done such as pulling wires or running power lines from the pole into your house.

However, if you have existing wiring already set up in your house then this can easily be installed.

Energy

Submetering allows you to monitor your energy usage and bill accordingly.

In order to install a submeter, the cost is typically $150 – $250 per meter. 

Some companies charge more for this service than others so it pays to do your research before deciding on one company over another. 

If you are looking into submetering then contact an expert at Energy Solutions Group!

With their expertise, they will help you find the best solution for your needs and budget. 

They offer complete services from installation of new meters all the way through billing and management of existing meters with no contracts or long-term commitments necessary!

Prepaid Electricity Meter

Prepaid Electricity Meter is a product that can be installed in your home to allow you to pay for the electricity usage at the time of use, rather than paying for it all up front.

This can save homeowners money while helping them manage their energy consumption and bills. 

Nowadays many people are looking into this type of service due to rising energy costs and a lack of trust in central power stations or government-owned utilities.

There are many benefits from using prepaid meters such as: lower monthly payments, no overages on your bill, customizable plans based on how much electricity you need each month, and more convenient payment options with cash or credit card transactions.

KWH

What does KWH stand for? 

KWH stands for Kilowatt-hour. It is a measure of energy, and it can be used to measure power as well.

A kilowatt-hour (kWh) is the most common unit of electric energy usage in household or commercial settings.

In order to figure out how much electricity you use each month, calculate your total kWh by multiplying your total amount of time on the device by its wattage.

For example, if you have a 100w light bulb that has been turned on for 10 hours this week then multiply 100w x 10hrs = 1000watts per day which equals 1 kilowatt-hour.

Is your business in the need of a new energy plan?

A sub meter can help you get the most out of every dollar spent on electricity.

Electical Wiring Diagram

If you’re an electrician or a do-it-yourselfer, this electrical wiring diagram will help you to install a sub meter. 

If not, call an electrician! 

The first step is to locate the main breaker panel and identify the feeders that come from it.

Next, place your new metering device between two feeders on separate circuits.

Make sure power can still be supplied if one circuit fails by installing a double pole breaker in the space left open after removing one of them.

This way, both circuits can’t go out at once due to a fault with either circuit.

Finally, connect all of the wires together and label them so they are easy for others who may need to work on them later.

Water Meter reading

A water meter reading is the process of measuring how much water has run through a pipe.

The amount of water that flows through will be recorded by the meter and can then be used to calculate the cost.

There are things you need to know about your submeter, including how it operates, what you should do if you have low or high readings, and how to install one.

Energy meter connection

Many people don’t realize it, but you can get your energy usage monitored and billed by the kilowatt hour.

This is particularly useful for homeowners who live in a home with multiple occupants or an apartment complex where individual units are rented out to tenants.

It’s also helpful if you want to make sure that your utility bill isn’t too high and that it includes all of the electricity used in your household.

The installation process varies depending on whether there is already a sub meter installed, what type of meter will be needed, and how long ago the last installation occurred; however, it usually costs about $150 to install a new meter at an apartment complex or multi-unit residence.

If you have any other questions about installing meters or anything you can reach out to the manufacturing company or your plumber or electrician.

Prepaid meter

A prepaid meter is a type of water meter that does not require a deposit to be paid before the installation begins.

This means that you can install it at your home or business without any upfront costs.

The idea behind this type of water meter is to protect the property owner from incurring charges for something they may never use because as soon as someone moves in, they start paying for their own usage.

The cost of installing a prepaid water meter varies depending on what kind and how many meters are needed but typically starts around $1000 and up, with an average price point being $1500-2000 per unit.

KWH Meter

A KWH meter is a device that measures the amount of electricity consumed, and would be useful in determining how much you are paying for electricity.

A sub-meter can either be installed on your property or on your utility pole, depending on what type of meter you have.

The installation will vary based on the size of the system being used, but it typically takes one to two days to complete.

Another important thing to consider is whether you want an energy audit done during installation so that any potential efficiency upgrades can also be completed at no additional charge.

There are some safety precautions that need to be taken before work begins which includes turning off all major power sources while running electrical wire inside your home or business building.

Pre paid

In order to install a sub meter, there are many options that come with the cost of installation.

The cheapest option is pre paid which comes in at around $800 for installation and then you add monthly payments for your electricity use.

Another good way to start, electricity bills can be expensive but luckily there are ways to save money on them!

One way is by installing a sub meter which will allow you to lock in your rate for up to 12 months.

This means that it won’t fluctuate like other rates do so you’ll know what kind of bill you’re going to get each month without having any surprises!

You can also make partial prepayments over time if this sounds more appealing.

Tenants

As a tenant, you need to understand that the cost of installing a sub meter varies by region.

On average, it costs between $150 and $250 to install the device.

The installation process is fairly simple if you are able to get access to your landlord’s main panel.

Once there, turn off power for the circuit that feeds your tenant’s unit and remove any breakers or fuses that may affect their electricity usage.

You can then connect the submeter to this circuit before turning on power again.

Electric Sub

When it comes to your electric bill, there’s always room for improvement.

It can be difficult to know where to start though.

One of the easiest ways is installing a sub meter on one or more circuits in your home that are not currently being monitored by an electric utility company.

Your electrician need to break down the costs and benefits of this simple project so you can make an informed decision about whether or not it would be right for you.

A water sub meter is a device that measures the flow of water into or out of tanks, pipes, or other containers.

The electric sub meter is an instrument that provides information on electrical energy usage.

These devices can be installed in homes to monitor electricity consumption and help you save money on your utility bills.  

What does an electric sub look like?

A typical one consists of two parts:

(1) a sensor connected to wires running down the side of the building; and

(2) a display unit near where it’s installed.

How Submeter installation Works?

When working on a building that is still in the planning stages, installing a submeter requires constructing a submetering system for a building that does not yet exist.

The installation of sub meters must be carried out by a plumbing or electrical contractor that possesses a valid license and the necessary qualifications.

According to the legislation, you are required to choose a reliable local electrician or another person who is technically capable to perform the sub meter installation.

Electric sub meter installation

It is best to leave the installation of an electrical sub-meter to a qualified utility sub-metering specialist and company rather than attempting it on your own.

Electric submeter installation involves scoping which is the first step in installing sub-meters across your facility. By placing sub-meters, this process helps you to analyze the degree of detail you want to get. Additionally, scoping demands that you evaluate the building’s current infrastructure.

Electric sub meter price: Electricity sub meter prices might vary significantly. This is due to the fact that various meters have varying features and degrees of quality.

Water submeter installation

In order to split water usage into consumption-based invoicing, a water submeter is simply a utility meter solution installed.

Water submeter installation cost

The first and most obvious thing that comes to mind when considering installing a water submeter system is how much it would cost. Depending on the type and number of meters required, installing a water submeter can cost anywhere between $1000 and $2000.

However, when it comes to submeter installation cost, it will cost you roughly $50,000 if your driveway is 800 feet long and underground service is required by municipal zoning.

Gas sub meter installation

A thorough evaluation of the current systems, recommendations, and the creation of a strategy are the first steps in a gas submeter installation project.

In a multi-tenant complex, a gas meter is installed on the gas line leading to each individual apartment in order to separately track each unit’s usage.

This makes it possible to break out the bills according to how much each renter actually used.

The results necessary to install and test gas submeters for gas consumer pipe systems are outlined in this unit of competency.

In other words, gas submetering enables correct billing for each individual tenant’s gas usage rather of dividing the expense equally.

Conclusion

If you need a sub meter installed, try calling your local gas company.

They will either be able to install it for you or put in a call with the proper utility companies for an installation cost estimate.

It will cost you an average of $100 to install a sub meter.

But how much do you save by installing one? If the price is right, it’s definitely worth considering!

To see if your property qualifies for a new water heater or other appliance installation, contact us today.

We’re happy to help find out what options are available and which ones might be best suited for your needs.

Final Thoughts on how much does it cost to install a sub meter

If you are looking for a sub-meter installation company, call us today.

With our experienced technicians and excellent customer service, any project is possible.

We have the best prices in town so give us a call!

We hope this article was helpful and informative. Have a great day!

Resources

Residential Sub-meter: What Is It, Why Get One? (link)
Utility submeter (link)
Water metering (link)

Leave a Comment